Standard reference platesKit HD0 - Additivity/Linearity

Set of two HD0 calibrated plates, containing UV filters in PMMA material, for carrying out the normative test to check theadditivity and linearity of your spectrophotometer in accordance with ISO 24443:2021, ISO/DIS 23675, ISO/CD 23698, FDA monograph 2011, etc.

Given their stable, standardized absorption and diffusion properties, they are suitable “reference emulsions” for checking and comparing instruments used for in vitro determination of UV protection for intralaboratory purposes.

Request a quote

absorbance (340 nm)

plates in kit

compliance with solar standards

Product information

Directions for use

Select two of the stable, standardized transparent PMMA UV reference plates. The absorbance peaks of these reference plates at 340 nm are at least 1.1 absorbance units, but less than 1.5 absorbance units (AU). Designate the first plate as plate A and the second plate as plate B.

Measure against air,
Place plate A in the light path of the spectrophotometer and measure in duplicate,
Place plate B in the light path of the spectrophotometer and measure in duplicate,
Place the two plates (A and B) one above the other with their rough sides facing each other in the light path and measure the combined absorbance (from 290 nm to 400 nm) in duplicate,
Check that the minimum range limit is 2.2 AU and a linearity of at least 85%.

Technical information

Dimensions	Plate: L: 50 mm x W: 50 mm x H: 1.5 mm Packaging : 6.6 x 6.6 x 2 cm
Weight	4.5 g for one plate
Packaging	Kit of 2 plates
Compliance	ISO/DIS 23675 – In vitro SPF ISO/CD 23698 – HDRS ISO 24443:2021 – UVAPF in vitro FDA monograph 2011 – Broad Spectrum Boots Star Rating system 2011 – UVA/UVB ratio
Optical property	Absorbance between 1.1 and 1.5 absorbance units (AU) at 340 nm
Chemical substances	Cadmium and cadmium compounds: ABSENCE Hexavalent chromium compounds : ABSENCE Lead and lead compounds: ABSENCE Mercury and mercury compounds: ABSENCE OTC/TPT: ABSENCE TBTO : ABSENCE Kerosene chloride (short caine) : ABSENCE PBBs : ABSENCE PBDEs : ABSENCE PCBs : ABSENCE Polychlorinated naphthalene (with three or more chlorines) : ABSENCE Asbestos : ABSENCE Specific azo compounds: ABSENCE Ozone-depleting substances: ABSENCE Radioactive substances: ABSENCE
Conditions of use	Temperature : [5° – 45°C]
Storage	Do not expose to direct sunlight Do not leave in a high temperature or high humidity area. Do not allow it to come into contact with other rubber and plastic products over long periods of time