Chamber THERMASTER
The THERMASTER has been specifically designed to control and guarantee substrate surface temperature during the in vitro solar testing process, in order to comply with the various standards.
Fully suitable for PMMA substrates molded HD6 and sandblasted SB6 the metal support (with the substrate on top) is used to maintain temperature by inertia during the weighing and application stages (less than 2 minutes).
precision
locations
%
compliance with solar standards
Product information
Directions for use
The THERMASTER developed by WENEOS is an easy-to-use thermal enclosure that maintains the substrate surface temperature throughout an in vitro solar test:
- Switch on the unit and set the desired temperature,
- Position PMMA substrates molded (HD6) or sandblasted (SB6) on the metal supports,
- The metal support with the substrate resting on it is used to maintain temperature by inertia during the weighing and spreading steps using the robot SPREADMASTER robot (usually in under 2 minutes),
- The substrate is placed back on the THERMASTER (in the dark) to ensure surface temperature control during the drying stage.
Technical information
Dimensions | W: 300 mm x D: 210 mm x H: 120 mm |
Weight | 2.3 kg |
Temperature |
|
Location | 9 locations with metal gondolas |
Compliance |
|
Security |
|
Current | 100-240 VAC / 50-60 Hz |
IP class | IP42 |
Conditions of use |
|
Environmental features
Power consumption | 30 W on average |
Composition | PS UL, Aluminium |
Warranty
1-YEAR STANDARD WARRANTY
WENEOS warrants that the equipment has been carefully tested, inspected and has left the factory in good working order, free from visible defects. WENEOS warrants the equipment to be free from defects in material and workmanship, under normal use and operating conditions, for a period of one (1) year from the date of initial commissioning or demonstration; or eighteen (18) months from the date of shipment from the factory; whichever occurs first. The warranty is limited to free replacement of all defective parts and free labor during the first warranty year. Defective parts replaced under this warranty will become the property of WENEOS. The above warranty is subject to the following conditions: The equipment is installed in France, in the European Union, or sold by authorized WENEOS representatives or their agents. The equipment being installed is operated and maintained in accordance with WENEOS operating instructions, maintenance instructions and specifications. Use only authorized WENEOS parts and components. The use of a duly authorized representative for all work performed on WENEOS equipment during the warranty period. Any variation of the above warranty must be in writing and mutually acceptable to WENEOS and the customer. The warranty does not apply to damage resulting from installation errors, or to any equipment that has been damaged, modified or misused by the purchaser. Equipment parts that would generally be considered consumable service items under normal use, such as fuses, fingertips, etc., are not covered by the warranty. THERE ARE NO WARRANTIES EXTENDING BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WENEOS BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF ANTICIPATED PROFITS SUFFERED BY THE PURCHASER.
Made in France
Discover our products compatiblefor better results
Helioplate HD6
Helioplate SB6
Metallic support
PMMA plate support
SPREADMASTER
Spreading robot